Touch Proof Lead Wires 48 Inch Two Color Pin Connector Latex Free, 1 Pair
Usually ships in 5 - 10 Days
$19.95
Frequently Bought Together
Recommended Accessories
Buy with confidence.
Contact our experts today.
When your stimulator stops delivering a consistent signal, the lead wire is usually the first thing to fail — not the unit itself. These touch proof lead wires give you a clean, low-cost way to get back to your therapy schedule without replacing the device. The 48 inch cable length lets you position electrodes on your back, hip, or leg while keeping the stimulator clipped to your waistband or resting beside you, so you are not tethered to one spot during a session. Each pair uses a shielded touch proof plug on the device end and a standard pin connector on the electrode end, which reduces the risk of accidental contact with an exposed metal pin during setup.
The two-color construction is built for interferential units, where keeping channels visually separated matters. If you run multiple channels, the color coding lets you trace each wire back to its output at a glance instead of untangling a bundle. These latex-free replacement lead wires fit units manufactured after May 1999, including BioStim INF, INF Plus, BioStim Plus, BioStim SD, BioStim M7, BioStim NMS2, Impulse 3000, Impulse 3000T, Impulse 2000, Impulse TENS D5, Impulse EMS D7, BioMed 2000 XL, BioMed 2000 XT, Micro Plus, and EMS 2000. Keeping a spare pair on hand means a frayed cable never costs you a treatment session.
- Touch Proof Safety Connection — The shielded device-end plug fully encloses the contact, so you avoid touching an exposed metal pin when connecting or disconnecting your stimulator between sessions.
- Two-Color Channel Identification — Color-coded conductors let you trace each lead back to its output instantly, which matters most on interferential units where correct channel placement drives treatment accuracy.
- 48 Inch Working Length — The full 1.2 meter cable reaches lower back, hip, and leg placements while the stimulator stays clipped at your waist, giving you freedom to sit, stand, or recline mid-session.
- Latex Free Construction — These latex-free replacement lead wires are safe for anyone with a latex sensitivity, removing a common barrier to daily at-home electrotherapy use.
- Standard Pin Electrode Connector — The pin end mates with the common 2 mm style electrode connector found on most reusable self-adhesive electrodes, so you can keep using the pads you already stock.
Product Specifications
| Device Connection: | Touch Proof |
|---|---|
| Electrode Connection: | Pin |
| Cable Length: | 48 in (1.2 m) |
| Cable Configuration: | Two Color |
| Latex Content: | Latex Free |
| Quantity: | 1 pair per package |
|---|---|
| Unit of Measure: | Each |
| Compatible Device Types: | Interferential, TENS, EMS, and NMES stimulators |
| Device Compatibility Requirement: | Units manufactured after May 1999 |
| Product Type: | Replacement accessory |