Hand Pendant Control for Electric Patient Lifts, 2 Button Up Down Remote
In Stock
Usually ships in 1 - 3 Days
Sale:
$65.00
1
/ Each
+
Free shipping
Want it shipped today?
Order within: 0 days 0 hours and 41 minutes
Ask an expert
Buy with confidence.
Contact our experts today.
Buy with confidence.
Contact our experts today.
Description
When the hand control on your patient lift stops responding, the entire lift comes out of service — even though the mast, actuator, and battery are perfectly good. This two-button hand pendant restores that function. It is the factory-matched control for Protekt electric patient lifts and sit-to-stand lifts, so you can bring the equipment back into daily use without replacing the lift itself or waiting on a service call.
Operation is deliberately simple. One button raises, one button lowers, and the buttons are sized and spaced so you can find them by feel while your attention stays on the transfer. The pendant hangs on the mast between uses and comes to hand quickly when you need it, whether you are moving from bed to chair, working over a commode, or performing a floor recovery. For anyone managing transfers at home without a second person, that predictability matters more than features.
Keeping a spare pendant on hand is inexpensive insurance for a facility or a home setup that depends on one lift. Cords and controls take the most physical abuse of any part of a lift — pinched under casters, dropped, pulled taut across a bed rail — and they are the component most likely to fail first. Ordering the correct pendant up front means the lift is back in service the same day it comes down.
Features
- Direct Replacement Control — This hand pendant is the factory-specified control for Protekt electric patient lifts, so the lift returns to full up and down operation without modification or adapters.
- Two Button Simplicity — One button raises, one lowers. There are no modes or menus, which keeps your attention on the transfer instead of on the control in your hand.
- Restores a Lift to Service — A failed control takes an otherwise sound patient lift out of use. Replacing the pendant is the fastest and least expensive way to bring it back.
- Broad Protekt Compatibility — Fits both the full-body electric patient lifts and the sit-to-stand models, so a facility running mixed Protekt equipment can stock one pendant across the fleet.
- Practical Backup Part — Cords and hand controls take the most physical wear on any lift. Keeping a spare on the shelf prevents downtime when the primary control finally gives out.
Product Specifications
| Product Type: | Hand pendant control for patient lift |
|---|---|
| Buttons: | 2 |
| Functions: | Raise and lower |
| Compatible Equipment: | Protekt 500 and Protekt 600 electric power patient lifts, Protekt 500 and Protekt 600 sit-to-stand lifts, Protekt All-In-One folding portable car transfer lift |
|---|---|
| Sold As: | Each |
| Condition: | New |
See any errors on this page? Let us know
Frequently Asked Questions (FAQs)
It is the listed hand pendant accessory for the Protekt 500 and Protekt 600 electric power patient lifts, the Protekt 500 and 600 sit-to-stand lifts, and the Protekt All-In-One folding portable car transfer lift.
No. Connector styles differ between manufacturers. Use the pendant specified for your lift model rather than assuming a physical connector match indicates electrical compatibility.
No. The pendant plugs into the lift control box. Follow the replacement instructions in your lift owner's manual and confirm both directions operate correctly before the next transfer.
No. It operates the lifting actuator only. Base width adjustment is handled by the foot pedal, and emergency lowering is a separate manual function on the lift.
For a home setup or facility running a single lift, yes. The hand control is a high-wear component, and a spare avoids the lift sitting idle while a replacement is ordered.