Platform Mounted Parallel Bars 10 ft, Height and Width Adjustable Rehab Bars
In Stock
Usually ships in 5 - 10 Days
Sale:
$2,180.00
1
/ Each
Ask an expert
Buy with confidence.
Contact our experts today.
Buy with confidence.
Contact our experts today.
Description
When you are rebuilding walking strength, stability, and confidence, you need equipment that holds steady every single time. These platform mounted parallel bars give you a full 10 feet of supported gait training distance on a satin-finish hardwood platform, so you can work through a complete walking cycle without repositioning or turning short. The height and width adjustable parallel bars set to your body and your task: handrails move from 29 to 42 inches high in ten locked positions and from 15 to 28 inches wide using ergonomic control knobs on each upright. The Secure Lock System and fail-safe ball-tip locking pins keep every setting exactly where you put it, so you can lean into the rails without second-guessing them.
The details matter when balance is the whole point. One-piece stainless steel handrails measure 1½ inches in diameter, giving you a consistent grip surface with no seams or joints to catch your hand. Tapered hardwood ends let you roll a wheelchair directly onto the platform and stand up inside the bars, and two anti-slip treads on each end protect your entry and exit. Heavy gauge steel uprights carry a black powder coated finish that stands up to daily clinical use, and a 30-inch clearance between uprights leaves room to move freely along the full run.
Features
- Full 10-Foot Gait Training Run — The 10-foot platform gives you enough distance to complete a full walking cycle without turning short, so each session builds real stride length and endurance.
- Height and Width Adjustable in Seconds — Handrails set from 29 to 42 inches high across ten locked positions and 15 to 28 inches wide, letting you match the bars to your height and task without tools.
- Secure Lock System with Fail-Safe Pins — Ball-tip locking pins and the Secure Lock System hold every upright setting firmly in place, so the rails stay exactly where you set them under full weight.
- Seamless Stainless Steel Handrails — One-piece 1½-inch stainless steel rails give you a continuous, easy-clean grip surface with no joints or seams to catch your hand mid-transfer.
- Wheelchair Accessible Hardwood Platform — Tapered hardwood ends let you roll straight onto the satin-finish platform, while two anti-slip treads on each end protect entry and exit points.
Product Specifications
| Platform Length: | 10 ft (305 cm) |
|---|---|
| Handrail Width Adjustment: | 15 in – 28 in (38 – 71 cm) |
| Handrail Height Adjustment: | 29 in – 42 in (74 – 107 cm) |
| Height Positions: | 10 locking positions in 1½ in increments |
| Clearance Between Uprights: | 30 in |
| Handrail Diameter: | 1½ in |
| Handrail Construction: | One-piece stainless steel |
| Upright Construction: | Heavy gauge steel, black powder coated finish |
| Platform Material: | Satin-finish hardwood with tapered ends |
|---|---|
| Platform Top Edge: | 3 mm |
| Anti-Slip Treads: | Two per platform end |
| Locking Mechanism: | Fail-safe ball-tip locking pin |
| Width Adjustment Control: | Ergonomic control knobs on each upright |
| Stability System: | Secure Lock System |
| Factory Installed Options: | Abduction board or non-slip matting |
See any errors on this page? Let us know
Frequently Asked Questions (FAQs)
Yes. Both ends of the platform taper down to floor level, so you can roll a wheelchair directly onto the surface and stand up inside the bars. Anti-slip treads on each end add traction at the transition.
Each upright telescopes in 1½-inch increments and locks into one of ten height positions with a ball-tip locking pin. Width adjusts separately using the ergonomic control knob on each upright.
No. The bars are mounted on their own hardwood platform, which supplies the base and stability, so no floor anchoring or permanent installation is required.
No. Both the abduction board and the full-length non-slip matting are factory installed options and must be specified at the time of order. They cannot be retrofitted after delivery.
Yes, provided you have the floor space. The unit needs a clear 10-foot run plus room to enter and exit at both ends, and it ships freight due to size and weight.