Patient Lift Control Box, Proactive Medical Protekt, TC12 Compatible, 24V IP66
In Stock
Usually ships in 1 - 3 Days
Sale:
$305.00
1
/ Each
+
Free shipping
Ask an expert
Buy with confidence.
Contact our experts today.
Buy with confidence.
Contact our experts today.
Description
When a power patient lift stops raising, lowering, or responding to the hand pendant, the control box is usually where the fault sits. This replacement patient lift control box restores the electrical heart of the lift so you can get the equipment back into service instead of pulling it from the floor and waiting on a full unit replacement. Built on the TC12 control platform used across Protekt power patient lifts and other TiMotion-equipped lifts, it manages actuator movement, pendant input, and battery power in one sealed, modular housing that drops into the existing mount.
You get an IP66-rated enclosure that stands up to routine wipe-down cleaning in facility and home settings, a built-in emergency stop button for immediate shutdown mid-transfer, and an audible alarm that warns you before the battery runs down. The box supports one to three motor channels at 24 VDC, so it works with single-actuator and multi-actuator lift configurations. Installation is straightforward: disconnect the failed unit, seat the replacement, and reconnect the pendant, actuator, and battery pack.
Keeping a spare on hand shortens downtime on high-use equipment and helps standardize replacement parts across a fleet of lifts. Confirm your lift model and existing electronics platform before ordering, since this control box accepts TC12-series components only.
Features
- Restores Lift Function Without Full Replacement — Swapping a failed patient lift control box returns a power lift to service quickly, protecting your equipment investment and avoiding the cost of replacing an otherwise sound lift.
- IP66 Sealed Enclosure — The housing is rated against dust and water jets, so it holds up to the repeated surface disinfection required in facility, rehab, and home care environments.
- Emergency Stop Built In — An integrated emergency stop button lets you cut power instantly during a transfer, giving you a direct safety control at the lift itself rather than at the pendant.
- Supports One to Three Actuators — With 24 VDC output across up to three motor channels, this TC12 control box fits both single-actuator floor lifts and multi-actuator sit-to-stand configurations.
- Audible Low Battery Warning — The alarm signals when remaining charge drops, giving you time to swap in a charged battery pack before a lift is stranded mid-shift.
Product Specifications
| Product Type: | Patient lift control box |
|---|---|
| Compatible Electronics: | TC12 series patient lift components |
| Motor Channels Supported: | 1 to 3 |
| Maximum Output: | 24 VDC, 10 A |
| Ingress Protection Rating: | IP66 |
| Backup Battery: | Detachable battery pack, not included |
| Emergency Stop: | Integrated push button |
|---|---|
| Low Battery Alert: | Audible alarm |
| Operating Temperature Range: | 41°F to 113°F (5°C to 45°C) |
| Electrical Safety Standards: | IEC 60601-1, ES 60601-1, IEC 60601-1-2 |
| Condition: | New |
See any errors on this page? Let us know
Frequently Asked Questions (FAQs)
It fits power patient lifts built on TC12-series electronics. It will not work with hydraulic lifts or lifts using a different electronics platform. Check the part number on your existing control box before ordering.
No. This is the control box only. The detachable battery pack, hand pendant, charger, and charging cradle are sold separately as individual replacement parts.
The unit is modular and mounts in place of the failed box. Disconnect the old unit, seat the replacement, and reconnect the pendant, actuator, and battery. Follow your lift's service manual and confirm operation before use.
No. The emergency stop is a manual push button. Once engaged, it must be released by hand before the lift will respond to pendant commands again.
Yes. The IP66-rated enclosure is sealed against dust and water jets, so routine surface wipe-down with standard facility disinfectants is appropriate. Do not submerge the unit.