Front Dual Caster Replacement Wheel for Sit to Stand Patient Lifts, 3 Inch
In Stock
Usually ships in 1 - 3 Days
Sale:
$39.99
1
/ Each
+
Free shipping
Ask an expert
Buy with confidence.
Contact our experts today.
Buy with confidence.
Contact our experts today.
Description
When a front caster on your sit to stand patient lift starts to drag, wobble, or squeal, every transfer becomes harder than it needs to be. This replacement front dual caster is built for Protekt sit to stand lifts and restores the smooth roll the base was designed to deliver. The dual wheel design spreads load across two wheels instead of one, which is what allows the lift to track straight and pivot cleanly in tight bedrooms, bathrooms, and resident rooms. Installing a fresh patient lift replacement caster is one of the least expensive ways to keep an expensive piece of equipment in service instead of sidelined.
You get a direct front position replacement, so there is no guesswork about which caster you are ordering. The part is sold as a single each, which means you can replace just the one that failed or order two if you are refreshing both front positions at the same time. That flexibility matters whether you are a facility maintenance tech working through a fleet of lifts, a DME provider turning around a rental unit, or a family caregiver keeping a home lift rolling quietly across hardwood and low pile carpet. Because Protekt lifts use a modular design with full parts breakdowns, this caster swap is a straightforward bolt on repair rather than a service call. Keep one on the shelf and you cut downtime the next time a wheel gives out.
Features
- Restores Smooth Transfers — A worn front caster makes a lift fight you at every turn. This replacement caster brings back clean rolling and predictable steering so transfers stay controlled and unhurried.
- Dual Wheel Load Distribution — The dual wheel design carries weight across two contact points instead of one, which supports straighter tracking and easier pivoting when you are maneuvering a loaded lift in tight spaces.
- Correct Front Position Fitment — This is a front caster replacement for Protekt sit to stand lifts, not a universal wheel. You order the specific position that failed and avoid mismatched hardware on the base.
- Low Cost Way To Avoid Downtime — Keeping a spare patient lift replacement caster on hand turns a sidelined lift into a fifteen minute fix, protecting the availability of equipment you already own.
Product Specifications
| Component Type: | Front dual caster assembly |
|---|---|
| Caster Diameter: | 3 in |
| Wheel Configuration: | Dual wheel |
| Swivel: | 360 degree swivel |
| Locking: | Non locking front position caster |
|---|---|
| Mounting Position: | Front caster position only |
| Compatibility: | Protekt sit to stand patient lifts |
| Sold As: | Each, single caster |
See any errors on this page? Let us know
Frequently Asked Questions (FAQs)
It is a front position caster for Protekt sit to stand patient lifts. Confirm your lift model and caster location before ordering, since front and rear casters are not interchangeable on these bases.
Sit to stand bases use two front casters. This listing covers one caster, so order two if you are replacing both sides at the same time.
No. On these lifts the braking casters are at the rear. The front casters swivel freely to allow the base to pivot during a transfer.
Yes. Basic hand tools are required to remove the old caster and secure the replacement. Follow the parts breakdown in your lift owner's manual for the correct sequence.
Replace a caster when it wobbles, binds, drags to one side, will not swivel freely, or shows cracked or flat spotted wheels. A failing caster makes the lift harder to steer under load.